Installation location and steps of Smoke Alarm

Smoke Alarm is installed in many high-end houses, and maybe one day it can become a real savior for the family. So how to install Smoke Alarm, and where should it be installed in the house? Generally speaking, a Carbon monoxide alarm is installed on the ceiling, but to avoid false alarms, it should be a little farther away from the kitchen. At the same time, in order not to miss the alarm reminder of the CO detector, the installation location should be about 3 meters in the sleeping area, so that the alarm will not be missed. Next, let's learn about the installation location and steps of the Smoke Alarm. Here are some answers.

Here is the content list:

l The installation location of Smoke Alarm.

l Installation steps of Smoke Alarm.

The installation location of Smoke Alarm.

First, professionals recommend installing Smoke Alarm 3 meters away from cooking utensils. In the sleeping area, install a Photoelectronic fire alarm within 4.5 meters, so that everyone can hear the alarm, even if the bedroom door is closed, it will not be affected. Second, for single-story houses, a Smoke Alarm should be installed in the corridor, between the sleeping and living areas. It is best to place it on the ceiling, at least 30 cm away from the wall or lamps. Third, for large-sized or multi-story houses, in addition to the above-mentioned single-story house installation location, the bottom of the stairs and the connection point of each stairway should be added. Also, consider buying interconnected alarms so that smoke or heat detected on one floor can trigger an alarm for the entire house. Fourth, no matter where it is in the space, a Smoke Alarm should not be installed on top of objects that produce steam-like substances, otherwise, you will just wait to hear the false alarm sound every day.

Installation steps of Smoke Alarm.

First, find the best location for the alarm to be installed, find out the location of hidden pipes and cables, and avoid drilling holes there. Then remove the alarm cover and install the battery as needed. Fix the Smoke Alarm back cover chassis on the wall or ceiling, mark the screw points with a sharp cone or nail through holes, drill holes and install the screws and bolts, then tighten the Smoke Alarm in place, and close the cover to start the test.

The above is the relevant content and information about the installation location and steps of Smoke Alarm summarized by the editor, I hope it can be helpful to everyone. If there are other problems you can communicate with us on the website, the editor will solve the problems for you in time. Our official website is https://www.kingdunalarm.com/. If you are engaged in work related to Photoelectronic smoke detectors or want to know more about our company. Our company adheres to the corporate culture of "quality first, customer first", and has always made unremitting efforts to become a professional Smoke Alarm supplier in the industry.