| Quantity: | |
|---|---|
KD-128A
KINGDUN
8531100000
MiNi Smoke Alarm
KD-128 Design
The instruction of smoke alarm devices
14
1134-CPR-111
EN 14604
KD-128 Mini Smoke Alarm
Ⅰ. Technical parameter
Working Voltage：DC9V（CR24503VX3）
Current：Quiescent Current：≤10uA
Alarming Current: ≤ 20mA Alarming Decibel：≥85dB/3m
LED Indicator：LED（Red）
Low voltage Alarming：≤7.3V
Working Temperature：-10℃~+40℃ Working Humidity：≤95%RH
Ⅱ、Dimension（mm）
Ⅲ、Test
Note：If the battery installed in wrong way, the detector will not work and maybe destroyed. If the detector operates smoothly, the Red LED will flash once in about 43S.
1、Contrarotate the installation panel in order to remove it;
2、Remove the insulated material and make sure the battery is connected in correct way;
3, Adjust the 3 clips of the installation panel to the 3 notch of the detector and turn the smoke detector clockwise in order to fasten it;
4 、 Depress the test button， the RED LED flashes quickly and in the mean while the detector sounds, it means the the detector works well.
Ⅳ、Installation
1、Choose a good position to instal the smoke alarm（ceiling）
2、Use the screw to fix the installation panel onto the ceiling.
3、Turn the smoke detector clockwise in order to fasten it to the installation panel tightly
MiNi Smoke Alarm
KD-128 Design
The instruction of smoke alarm devices
14
1134-CPR-111
EN 14604
KD-128 Mini Smoke Alarm
Ⅰ. Technical parameter
Working Voltage：DC9V（CR24503VX3）
Current：Quiescent Current：≤10uA
Alarming Current: ≤ 20mA Alarming Decibel：≥85dB/3m
LED Indicator：LED（Red）
Low voltage Alarming：≤7.3V
Working Temperature：-10℃~+40℃ Working Humidity：≤95%RH
Ⅱ、Dimension（mm）
Ⅲ、Test
Note：If the battery installed in wrong way, the detector will not work and maybe destroyed. If the detector operates smoothly, the Red LED will flash once in about 43S.
1、Contrarotate the installation panel in order to remove it;
2、Remove the insulated material and make sure the battery is connected in correct way;
3, Adjust the 3 clips of the installation panel to the 3 notch of the detector and turn the smoke detector clockwise in order to fasten it;
4 、 Depress the test button， the RED LED flashes quickly and in the mean while the detector sounds, it means the the detector works well.
Ⅳ、Installation
1、Choose a good position to instal the smoke alarm（ceiling）
2、Use the screw to fix the installation panel onto the ceiling.
3、Turn the smoke detector clockwise in order to fasten it to the installation panel tightly
