Battery Mini 10y Fire Smart Smoke Alarm

Product Specifications:

 

Technical parame- ters	Smoke detector
	Voltage	DC3V（built-in CP952434）
	Low-voltage inspection	2.2V
	current	Working current	Quiescent current
		≤120mA	≤2uA
	Alarm loud- ness	≥85dB/3m
	Working temperature	-10℃~+40℃
	Ambient humidity	≤95%RH（no condensation）
	Status dis- play	Normal smoke detection	LED (red) flashes once about every 344 seconds, no alarm sound
		Smoke detection or key test	LED (red) flashes and continuous alarm is given
		Low sensitivity detection (silent mode)	LED (red) flashes about every 10 seconds, no alarm sound, automatically cancel low sensi- tivity detection about 9 minutes later
		Alarm memory	LED (green) flashed 3 times about every 43 seconds, and stops 24 hours later. The first time you press test/mute button after alarm is made, the detector will hint by special alarm mode.
		End of useful life	After working for 10 years, alarm sound is made, the buzzer buzzes 3 times about every 43 seconds
		Low-voltage inspection	LED (red) flashes once, make “di” alarm sound about every 43 seconds

 Appearance and dimension（Figure 1）

 

LM-109

(Figure1)

 

 

Operation:

• In areas where ventilation and/or air conditioning systems are used is must be ensured that air movement does not affect the function of the smoke detector.

• Smoke detectors must be permanently fixed on the ceiling. Mounting instructions must be observed.

• Choose a mounting method that ensures a holding force of at least 20N in vertical direction.

• The smoke detector is designed for monitoring residential buildings or residential premises (not for industrial or commercial usage).

• A function test must be performed on each smoke detector after installation.

• The functionality of each installed smoke detector must be regularly checked and maintenance measures must be ensured. Perform function test 1 per week, clean every 3 months.

• Smoke detectors must be taken out of service at the latest after 10 years and replaced with a new device.

 

Mounting locations

Mounting locations for smoke detectors:

• Bedrooms, children’s rooms and corridors must be equipped (basic requirement) with smoke detec- tors.

• Always on the ceiling.

• 50 cm from the wall (or beam).

• If the room is subdivided by ceiling-high furniture etc., a smoke detector must be installed in each room partition.

• In rooms with a floor area ≤60m2, divided into ceiling boxes by beams or joists, the following ap- plies:

o In ceiling boxes bigger > 36m2 a smoke detector must be installed per ceiling box (see Fig- ure 1a).

o In ceiling boxes ≤36m2 and with ceiling slopes ≤20°as well as beams or joists with a height

≤0.2m, the individual ceiling boxes are not taken into account (see Fig 1.b). Install smoke detectors as centrally as possible in the room, in a ceiling box or on the joist.

o In these rooms have beams or ceiling joists with a height >0,2m, the smoke detector must be installed on a beam or girder, as centrally as possible in the room (see Fig c).

• In rooms with a floor area of >60m2, an additional smoke detector must be installed per 60m2.

 

Planning examples

For apartments and single family homes

 Example for use in a single-family home

 

Arrangement in special room geometries

Following distance ratios and arrangements are recommended for detector positioning:

a) 
Linear corridor

b) Rectangular corridor

 

c) 

Detector arrangement in large corridors

d) Detector arrangement in large corridors with corners