Mini Smoke Alarm KD-128G

MiNi Smoke Alarm

KD-128 Design

The instruction of smoke alarm devices

14

1134-CPR-111 

EN 14604

KD-128 Mini Smoke Alarm

Ⅰ. Technical parameter

Working Voltage：DC9V（CR24503VX3）

Current：Quiescent Current：≤10uA

Alarming Current: ≤ 20mA Alarming Decibel：≥85dB/3m

LED Indicator：LED（Red）

Low voltage Alarming：≤7.3V

Working Temperature：-10℃~+40℃ Working Humidity：≤95%RH

Ⅱ、Dimension（mm）

Ⅲ、Test

Note：If the battery installed in wrong way, the detector will not work and maybe destroyed. If the detector operates smoothly, the Red LED will flash once in about 43S.

1、Contrarotate the installation panel in order to remove it;

2、Remove the insulated material and make sure the battery is connected in correct way;

3, Adjust the 3 clips of the installation panel to the 3 notch of the detector and turn the smoke detector clockwise in order to fasten it;

     

4 、 Depress the test button， the RED LED flashes quickly and in the mean while the detector sounds, it means the the detector works well.

Ⅳ、Installation

1、Choose a good position to instal the smoke alarm（ceiling） 

2、Use the screw to fix the installation panel onto the ceiling.

3、Turn the smoke detector clockwise in order to fasten it to the installation panel tightly

Do not use the product in the humid, dusty and smoky environment.

Ⅴ、Low Voltage Alarm

When the battery reached a low energy level, the detector will sound to indicate that the battery must be replaced.

Ⅵ、Notice

1、Test the the smoke alarm weekly；

2 、If the product does not work properly, please check the battery firstly; If the battery is ok, please do not open the product by yourself, please contact the professional.